What Kind Of Plywood For Floors?

How thick should plywood be for flooring?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

Is plywood or OSB better for a subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

Do plywood floors hold up?

While it has many positive qualities, plywood will never match up to the hardwood alternative. Plywood is less durable than hardwood and while you can paint it to improve its aesthetic, plywood won’t look as grand as premium hardwood floors.

What kind of plywood do you use for tile subfloor?

Oriented strand board (OSB) and exterior-grade plywood will work if first covered with a latex-modified mortar and a tiling backer board. Install a cement-based backer board following the manufacturer’s instructions. This provides a solid surface under the tile that prevents flexing that could lead to cracking.

You might be interested:  Quick Answer: What Are The Dimensions Of A Plywood Sheet Of Wood?

What is the best plywood for underlayment?

Poplar or Birch Plywood with a fully sanded face and exterior glue. Lauan Plywood, when used as an underlayment, should be Type 1 (Exterior). The best grade is BB and the next best is CC, while OVL (overlay grade) is the minimum acceptable face grade. There is a wide variety of quality and species classed as lauan.

Is it OK to use OSB for subfloor?

Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.

Is OSB cheaper than plywood?

OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be a “green” building material because it can be made from smaller-diameter trees, such as poplars, that are often farmed.

What are the disadvantages of plywood?

Disadvantages of Plywood:

  • It is more expensive than Medium Density Fiberboard (MDF).
  • Because the layers of veneers are seen at the edges, edges have to be finished either with laminate or veneer.
  • It often get splinter from the edges during transportation.
  • It is quite difficult to cut.

What should I put on my plywood floor?

Wallpaper as floor paper: For this stunning DIY finish, fill and smooth gaps in the plywood subfloor with fast-setting drywall compound and a trowel. Then put down wallpaper in your pattern of choice, followed by three or four coats of polyurethane or other clear hard floor finish.

You might be interested:  Question: Polyurethaned Plywood Flooring What To Seal With Dogs?

What’s wrong with plywood?

Much of the problems with plywood are a result of these cores, and here’s why. Some of the cores are not well made, they may have “voids” in them, or the quality of the wood they are made from may just be of poor quality.

Can I put floor tile directly on plywood?

Tile can be laid on plywood. But do not install tile directly on the plywood subfloor itself. Use an intervening layer of a sheet of thinner plywood.

Can I use cement board instead of plywood?

Cement backerboard is more stable than plywood in high humidity and other wet environments. It won’t swell and buckle the way that plywood does, so it’s safe to use in mudrooms and bathrooms where things like spills and puddles are normal, as well as in areas with high levels of moisture in the air.

Can you use treated plywood for subfloor?

Use pressure treated wood in any situation where there’s direct contact between the wood and anything that could supply moisture. Subflooring in the kitchen and bathroom may also be pressure treated since water leaks are common in these rooms and subflooring is inaccessible to the residents.

Leave a Reply

Your email address will not be published. Required fields are marked *