Quick Answer: What Type Of Plywood Is Used For Flooring?

What kind of plywood do you use for subfloor?

Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.

Is plywood or OSB better for a subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

How thick should plywood be for flooring?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

What type of plywood is used for tile floors?

Use the Right Type of Plywood Exterior grade or plywood should be used for the substrate. Under no conditions should you use veneer-bond plywood. Veneer plywood is interior-grade plywood that has a top and bottom layer of very thin hardwood bonded to it.

You might be interested:  FAQ: How Wide Can You Make A Plywood Door?

What is the strongest plywood?

If you ever wondered “what is the strongest plywood?” The answer is Marine plywood. It is the strongest and toughest of all plywood on the market. It is bonded with high-quality glues to make the plies structurally solid and resistant to moisture.

Is it OK to use treated plywood for subfloor?

Under the IRC this 19% or less moisture content lumber is called kiln-dried-after-treatment lumber and is perfectly acceptable to be used in structural sheathing, subflooring, or framing.

Is it OK to use OSB for subfloor?

Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.

What thickness subfloor is recommended?

The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

What thickness plywood should I use for bathroom flooring?

Consider what the top layer of the bathroom flooring will be since some types of plywood are better suited for different flooring. For hardwood, tongue-and-groove CDX plywood rated AC with a 1/2- to 3/4-inch thickness is best. Specifically for subflooring, tongue-and-groove plywood is strong and will reduce squeaks.

Is 7/16 OSB OK for flooring?

The thicknesses are as follows: 7/16-, 15/32- and 1/2-inch-thick panels require joists spaced 16 inches on center; 19/32- and 5/8-inch-thick panels require joists spaced 20 inches on center. For retrofitting older construction, 23/32- and 3/4-inch-thick panels can be used over 24-inch on center joists.

You might be interested:  Readers ask: How Do I Stain Black Walnut Plywood To Match The Wood?

Is 12mm plywood OK for flooring?

12mm Plywood The cross-graining technique used in our 12mm ply improves strength, stability and prevents warping, making it excellent for bath panelling, wall lining floors and roofs.

Can I use cement board instead of plywood?

Cement backerboard is more stable than plywood in high humidity and other wet environments. It won’t swell and buckle the way that plywood does, so it’s safe to use in mudrooms and bathrooms where things like spills and puddles are normal, as well as in areas with high levels of moisture in the air.

Is 18mm plywood suitable for flooring?

Plywood is the desired material for use in domestic flooring, but this particular board is extremely multi purpose. These boards can be used in a number of ways, including site hoarding, rood decking and even vehicle body work.

Leave a Reply

Your email address will not be published. Required fields are marked *