Question: What Type Of Plywood For Subfloor?

Is plywood or OSB better for a subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

What thickness plywood should I use for flooring?

The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

What is the best subfloor material?

Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

You might be interested:  FAQ: What Are The Differ C3 Vs C4 Birch Plywood?

What type of plywood creates a quieter subfloor?

OSB and CDX subfloors come in tongue and groove. It’s ideal for subflooring, because it prevents the edges of the plywood from moving and squeaking after insulation. Construction adhesive is used to better seal the tongue-and-groove joint.

Is it OK to use OSB for subfloor?

Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.

Should you lay plywood over plank subfloor?

Take time to make sure your existing planks are well secured in place. Repair any broken planks. Install a layer of at least ½” or preferably 5/8” ply over the existing planks. Like all wooden flooring products, it’s a good idea to acclimatise your plywood before laying it.

What thickness plywood should I use for bathroom flooring?

Consider what the top layer of the bathroom flooring will be since some types of plywood are better suited for different flooring. For hardwood, tongue-and-groove CDX plywood rated AC with a 1/2- to 3/4-inch thickness is best. Specifically for subflooring, tongue-and-groove plywood is strong and will reduce squeaks.

Can you use treated plywood for subfloor?

Use pressure treated wood in any situation where there’s direct contact between the wood and anything that could supply moisture. Subflooring in the kitchen and bathroom may also be pressure treated since water leaks are common in these rooms and subflooring is inaccessible to the residents.

You might be interested:  Readers ask: How To Install Plywood For Hurricanes?

What is the best material for a bathroom subfloor?

Plywood as a Subfloor Material Traditionally, exterior grade plywood has been the subfloor material of choice for many bathroom flooring projects. Plywood is made by gluing alternating layers of wood veneer. CDX plywood (¾”) in particular is used often because it has a high level of resistance to moisture and humidity.

What is the difference between subfloor and underlayment?

Basically, subfloors are a structural part of your home that provide strength and rigidity to your home’s flooring. Underlays, on the other hand, protect your floor covering from moisture, help soundproof your floor, and offer cushioning and comfort underfoot.

What thickness should subfloor be?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

What is stronger MDF or plywood?

MDF is ideal for cutting, machining and drilling, since it does not chip easily. On the other hand, plywood is a much more stronger material, which can be used for doors, floors, staircases and outdoor furniture.

Should you nail or screw subfloor?

Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.

Can you use screws for subfloor?

Most construction experts use 3-inch steel screws for plywood subfloors. So if your subfloor is 3/4 of an inch thick, any screw about 1 3/4 inches long will do the trick. If the plywood subfloor you’re placing is 5/8 of an inch thick, you need a screw about 1 5/8 inches long.

Leave a Reply

Your email address will not be published. Required fields are marked *