- 1 What size plywood is used when the joists are 16 apart?
- 2 How many subfloors are needed?
- 3 Can you use 7/16 OSB subfloor?
- 4 How far can a floor joist span without support?
- 5 What is the best plywood for underlayment?
- 6 Do I need 2 layers of subfloor?
- 7 How many joists is 12 feet?
- 8 What goes under floor joists?
- 9 Do you nail or screw subfloor?
- 10 Is it better to use OSB or plywood for subfloor?
- 11 Why is 7/16 OSB so expensive?
- 12 Is OSB better than plywood?
- 13 Can you use OSB for subfloor?
What size plywood is used when the joists are 16 apart?
The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.
How many subfloors are needed?
Short answer, it’s absolutlely never acceptable practice to install tile over vinyl. As to how many layers of subfloor, tile substrate should be a minimum of 1-1/8″, best provided with two layers of 5/8″ ACX plywood, never use osb or particle board under tile.
Can you use 7/16 OSB subfloor?
Oriented Strand Board OSB can be used for subfloors, although it is not as common as CDX. For 19/32-inch-thick panels, the joists should be 20 inches on center. For 23/32-inch-thick panels, the joists should be at least 24 inches on center.
How far can a floor joist span without support?
The maximum distance a 2×6 can span, according to the 2018 IRC, for a floor joist, is 12′-6”, ceiling joist 20′-8”, rafter 18′-0”, deck board 24”, deck joist 9′-11”, deck beam 8′-3”, and 6′-1” as for header. Always check the codes for determining factors or consult a Structural Engineer.
What is the best plywood for underlayment?
Poplar or Birch Plywood with a fully sanded face and exterior glue. Lauan Plywood, when used as an underlayment, should be Type 1 (Exterior). The best grade is BB and the next best is CC, while OVL (overlay grade) is the minimum acceptable face grade. There is a wide variety of quality and species classed as lauan.
Do I need 2 layers of subfloor?
3 Answers. Fasten your first layer plywood subfloor as you normally should. The second (top) layer of plywood joints should not coincide with the joists and the second layer should not be fastened to the joists. Article quote from – Position of Underlayment to Prevent Cracked Tile and Grout By Frank Woeste and Peter A.
How many joists is 12 feet?
A 12-foot long deck with joists 16 inches on center will require 10 joists.
What goes under floor joists?
What Is a Subfloor? Subflooring provides a base for finish flooring and also serves as a platform during construction. It may be made of boards laid either at right angles or diagonally across joists. Or the subfloor may be made of plywood or other panel products that are laid perpendicular to the joists.
Do you nail or screw subfloor?
Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.
Is it better to use OSB or plywood for subfloor?
The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.
Why is 7/16 OSB so expensive?
One reason for the OSB price surge is that production hasn’t kept up with the demand as plywood mills closed. “This issue is really one of production capacity,” Carliner said. OSB manufacturers curtailed output after two years of low prices in 2001 and 2002.
Is OSB better than plywood?
Wood fiber is used more efficiently in osb. Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists.
Can you use OSB for subfloor?
Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.