## What is the average thickness of plywood?

The standard thicknesses for plywood are 1 ¼, 1 1/8, ¾, 5/8, ½, 3/8, ¼, and 1/8 inches. The corresponding actual thicknesses are 1 ¼, 1 1/8, 23/32, 19/32, 15/32, 11/32, 1/4, and ⅛, respectively.

## How is plywood thickness measured?

Because the actual thickness may vary measuring the plywood is the only accurate way to determine its thickness.

1. A 3/4” sheet is actually 23/32” thick.
2. A 1/2” sheet is actually 15/32” thick.
3. A 1/4” sheet is actually 7/32” thick.

## Which is thicker 7mm or 5mm?

5mm = just over 3/16 inch. 7mm = almost 9/32 inch (= a bit over 1/4 inch) 8mm = 5/16 inch.

## What thickness does plywood come in MM?

The thicknesses of the board vary from 6.5 to 30 mm. The standard widths are 1,200, 1,220, 1,500 and 1,525 mm, and lengths vary between 1,200 and 3,660 mm.

## What is the thinnest plywood you can buy?

The thinnest plywood on the market ranges all the way down to 2mm thick (just over 1/16 inch). These are obviously specialty plywood products, manufactured for special applications which can’t be accomplished by any other product on the market, whether plywood or some other material.

## Do they make 5/16 plywood?

Plywood manufacturers use lauan — sometimes called Philippine mahogany — to make a utility-grade plywood for cabinetry and interior woodwork. It comes in standard 4- by 8-foot sheets with thicknesses of 1/8, 1/4, 5/16 and 3/4 inches.

You might be interested:  Often asked: How To Cut A Circle Out Of Plywood?

## Is OSB better than plywood?

Wood fiber is used more efficiently in osb. Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists.

## What is MDF plywood?

Medium-density fibreboard (MDF) is an engineered wood product made by breaking down hardwood or softwood residuals into wood fibres, often in a defibrator, combining it with wax and a resin binder, and forming it into panels by applying high temperature and pressure. MDF is generally more dense than plywood.