Often asked: What Size Plywood For Subfloor?

Is 1 2 plywood strong enough for a floor?

Plywood Thicknesses Thick plywood sheets are durable, but they’re also heavy, and it may be safer to use 1/2-inch plywood — which is actually 15/32 inch thick — to avoid loading the ceiling joists with extra weight.

What is the best size plywood for flooring?

The National Wood Flooring Association recommends a minimum plywood panel thickness of 7/8-inch for joist spans of 19.2 to 24 inches, and a minimum plywood panel thickness of 5/8-inch for joist spans of 16 inches or less.

Is plywood or OSB better for a subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

Can you use 1/2-inch plywood flooring?

The thicknesses are as follows: 7/16-, 15/32- and 1/2-inch-thick panels require joists spaced 16 inches on center; 19/32- and 5/8-inch-thick panels require joists spaced 20 inches on center. For retrofitting older construction, 23/32- and 3/4-inch-thick panels can be used over 24-inch on center joists.

You might be interested:  How Much Does 1 4 Inch Birch Plywood Weight?

How much weight will 3/4 plywood support?

A 12-by-36-inch piece of 3/4-inch fir plywood can easily support 50 pounds.

What is the best plywood for underlayment?

Poplar or Birch Plywood with a fully sanded face and exterior glue. Lauan Plywood, when used as an underlayment, should be Type 1 (Exterior). The best grade is BB and the next best is CC, while OVL (overlay grade) is the minimum acceptable face grade. There is a wide variety of quality and species classed as lauan.

Do you nail or screw subfloor?

Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.

Is 12mm plywood OK for flooring?

12mm Plywood The cross-graining technique used in our 12mm ply improves strength, stability and prevents warping, making it excellent for bath panelling, wall lining floors and roofs.

Can I use OSB plywood for subfloor?

Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.

What thickness of subfloor should I use?

The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

You might be interested:  Often asked: What Are The Standard Dimensions Of A Sheet Of Plywood?

Can you use half inch plywood for subfloor?

If the subfloor is not acceptable, it can often be overlaid with 1/2 -inch plywood. Some wood flooring may not hold sufficiently if installed directly over solid wood subfloors.

Should you lay plywood over plank subfloor?

Take time to make sure your existing planks are well secured in place. Repair any broken planks. Install a layer of at least ½” or preferably 5/8” ply over the existing planks. Like all wooden flooring products, it’s a good idea to acclimatise your plywood before laying it.

Leave a Reply

Your email address will not be published. Required fields are marked *