How Thick Should Plywood Flooring Be?

What is the best thickness of plywood for flooring?

The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

What type of plywood is used for flooring?

CDX plywood is the most popular type of traditional plywood. It’s made with a rough outer layer that typically grades C, D or X. Almost all subfloor plywood is some type of CDX. There’s no reason to buy high grade finished plywood for use as a subfloor if your just going to cover it up with finished flooring.

How thick should plywood be for vinyl flooring?

When you install your vinyl on a wood subfloor, the top plywood should be a minimum of 1/4″ thick. For most subfloors, you will need to add an extra layer of wood. To do this, measure and cut the plywood to fit your room.

You might be interested:  How Much To Plywood A Floor?

How thick does plywood have to be to walk on?

Sizing the Plywood No matter what the spacing is on your ceiling joists, 3/4-inch plywood should be used if you plan on walking on it. If you plan on placing the plywood around the perimeter of the opening or door and using it only to store light boxes or materials, 1/2-inch-thick plywood should suffice.

Is it better to use OSB or plywood for subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

Is 12mm plywood OK for flooring?

12mm Plywood The cross-graining technique used in our 12mm ply improves strength, stability and prevents warping, making it excellent for bath panelling, wall lining floors and roofs.

What are the 3 types of plywood?

Although specialty plywood can have any number of plies above three, most plywood is categorized as 3-ply, 5-ply or multi-ply.

  • 3-ply is one of the most common types of plywood.
  • 5-ply is a versatile type of plywood that is about 4-millimeters thick.
  • Multi-ply is a catchall term for plywood with seven or more plies.

What is the strongest plywood?

If you ever wondered “what is the strongest plywood?” The answer is Marine plywood. It is the strongest and toughest of all plywood on the market. It is bonded with high-quality glues to make the plies structurally solid and resistant to moisture.

You might be interested:  Often asked: How To Install Metal Roofing Over Plywood?

Do I need plywood under vinyl flooring?

Vinyl flooring is usually not installed directly over the subfloor in residential applications. In most cases 4-by-8-foot sheets of particle board or plywood must be installed in preparation for the vinyl floor install. It needs to be built up to the same elevation of the other flooring types in the house.

Can you lay vinyl flooring over plywood?

Can I install vinyl flooring over wood, plywood, particleboard or chipboard? You can install vinyl over wood floors if you put a plywood subfloor on top of it. Do not install glue down or peel and stick products over particleboard, chipboard or any form of embossed floor.

How much weight will 3/4 plywood support?

A 12-by-36-inch piece of 3/4-inch fir plywood can easily support 50 pounds.

Can I walk on half inch plywood?

Joist Spacing and Attic Use The joist spacing in some attics is 24 inches, and 1/2-inch sheets will sag and possibly break when spanning that distance. Thinner plywood can flex when you walk on it — even with 16-inch spacing — and this will damage the flooring.

Is it OK to put plywood in the attic?

An attic can be floored with 1/2″ CDX plywood, if it is being used only for storage. However, the same can’t be said if you are planning on using the space as a living space. In that case, you will need to use 3/4″ thick plywood. The building code allows for the use of OSB in place of plywood for subflooring.

Leave a Reply

Your email address will not be published. Required fields are marked *