FAQ: What Plywood To Use For Subfloor?

What kind of plywood do you use for subfloor?

Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.

What thickness plywood should I use for flooring?

The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

Is plywood or OSB better for a subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

You might be interested:  What Is T 11 Plywood Siding?

What is the best wood to use for subfloor?

Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Is it OK to use treated plywood for subfloor?

Under the IRC this 19% or less moisture content lumber is called kiln-dried-after-treatment lumber and is perfectly acceptable to be used in structural sheathing, subflooring, or framing.

Can you use Sande plywood for subfloor?

With its ability to be stained and finished any way that you want, it’s certain to create a beautiful piece that you can treasure forever. Alternatively, you might just need something durable for your bathroom subfloor. No matter what your project is, sande plywood might just be the best thing for you.

What thickness plywood should I use for bathroom flooring?

Consider what the top layer of the bathroom flooring will be since some types of plywood are better suited for different flooring. For hardwood, tongue-and-groove CDX plywood rated AC with a 1/2- to 3/4-inch thickness is best. Specifically for subflooring, tongue-and-groove plywood is strong and will reduce squeaks.

What is the best material for a bathroom subfloor?

Plywood as a Subfloor Material Traditionally, exterior grade plywood has been the subfloor material of choice for many bathroom flooring projects. Plywood is made by gluing alternating layers of wood veneer. CDX plywood (¾”) in particular is used often because it has a high level of resistance to moisture and humidity.

You might be interested:  How To Install Outdoor Carpet On Plywood?

Do you have to use tongue and groove plywood for subfloor?

For subflooring, you use tongue and groove plywood. The tongue and groove are only along the 8 foot edges. On the four foot edges, your seams will fall on joist tops, so no need for tongue and groove.

Should you lay plywood over plank subfloor?

Take time to make sure your existing planks are well secured in place. Repair any broken planks. Install a layer of at least ½” or preferably 5/8” ply over the existing planks. Like all wooden flooring products, it’s a good idea to acclimatise your plywood before laying it.

Can you use MDF for subfloor?

Underlay sits between the structural subfloor floor and the decorative surface fitting, like carpet, vinyl, or tiles. A hard underlay like MDF gives a smooth, consistent surface since it covers any imperfections present in the subfloor. Its high density also makes it resistant to wear.

How do you install plywood over subfloor?

Instructions For Installing Another Layer Of Plywood

  1. Acclimate the underlayment. Store underlayment in the room it will be installed in for 72 hours before the actual installation.
  2. Clean the subfloor.
  3. Start installing the plywood.
  4. Staple the boards in place.
  5. Fill the seams.

Do you nail or screw subfloor?

Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.

What is the difference between subfloor and underlayment?

Basically, subfloors are a structural part of your home that provide strength and rigidity to your home’s flooring. Underlays, on the other hand, protect your floor covering from moisture, help soundproof your floor, and offer cushioning and comfort underfoot.

You might be interested:  FAQ: How To Install A Plywood Subfloor?

Is it OK to use OSB for subfloor?

Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.

Leave a Reply

Your email address will not be published. Required fields are marked *