FAQ: What Jigsaw Blade For Plywood?

What jigsaw blade do I use to cut plywood?

Instead, select a 10- to 12-tpi blade for larger, gradual curves, or a 20-tpi blade for tight curves (1″ radius or less) in solid wood and all cuts in plywood or melamine-coated particleboard. Beyond tooth count, also consider the blade design.

Can I use a jigsaw to cut plywood?

The jigsaw can be used to make both straight and curved cuts in a wide variety of materials, including wood, particleboard, plywood, plastic, metal, even ceramic tile.

How do you cut a plywood with a jigsaw without splintering?

Use transparent masking tape for ease of use and mark your cutting line on the tape. Now cut along the line normally. The masking tape ensures that the veneers remain intact with the wood and thus there is no splintering.

What tooth blade is best for plywood?

For cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well. For joinery work: Use a 40-tooth to 50-tooth all-purpose combination blade.

You might be interested:  Question: How To Finish Baltic Birch Plywood Darker?

How do I choose a jigsaw blade?

When cutting wood, choose a 6–10-tpi blade. Wider gullets (the low areas between teeth) help clear sawdust. Cutting metal or plastic sheets calls for a higher tooth count and slower cut speed. A 6-tpi blade cuts faster, and tracks truer in thick material, but produces more chip-out than a 10-tpi blade.

What is a scrolling jigsaw blade used for?

Scrolling Blades Blades designed for scroll cutting are narrower than standard blades. This allows them to cut tight curves without binding or breaking. These blades are perfect for delicate cutting for making good, clean and controlled cuts.

Why won’t my jigsaw cut straight?

Your jigsaw may not be cutting straight because it’s outdated, lacking guide bearings necessary for straight cuts. Components such as blade clamps and guide bearings can also get damaged or worn. It’s also possible that human error is to blame, and you need a better straight edge or technique.

Can you cut 18mm plywood with a jigsaw?

​In general, jigsaws can cut all types of material, not just wood. And, as it relates to wood, jigsaws can cut both hardwood and softwood. However, the process you use to cut hardwood is different. A jigsaw isn’t the perfect solution for harder woods, but it will work just fine, so long as you move slowly.

How do you cut 5mm plywood without splintering?

Best Way to Cut Wood Without it Splintering

  1. First, you will need to mark your cut with a pencil.
  2. One your tape is in place, make your cut along the line with your saw.
  3. The tape holds the wood together so that even the cheapest piece of wood comes out with a clean edge.
You might be interested:  Often asked: How Many Sheets Of Plywood Can A 380 Go Through?

How many teeth do you need for a plywood blade?

Framing blades have 24 teeth and are effective for jobs like rough carpentry where speed is more important than getting a clean cut. Plywood blades have 100 or more fine teeth designed to create a finish with minimal splintering.

How do you cut plywood without splintering?

How to Avoid Splintering and Tearing when Cutting Plywood

  1. Always use an appropriate blade for plywood, and be sure that it’s sharp.
  2. Be sure the good face of your plywood is closer to the outside of the blade.
  3. Then, add a strip of masking tape to both the top and bottom of the sheet, directly over the cut line.

What side do you cut plywood?

The bottom edge usually remains splinter-free. So always cut plywood with the good side down.

Leave a Reply

Your email address will not be published. Required fields are marked *