## What size plywood is 19 32?

Sheathing Plywood (Common: 19/32 in. x 4 ft. x 8 ft.; Actual: 0.563 in. x 48 in.

## What size is 23 32 plywood?

Sanded Plywood (Common: 23/32 in. x 2 ft. x 4 ft.; Actual: 0.703 in. x 23.75 in.

## What is 19 32 as a decimal?

19/32 as a decimal is 0.59375.

## What is the thinnest plywood you can buy?

The thinnest plywood on the market ranges all the way down to 2mm thick (just over 1/16 inch). These are obviously specialty plywood products, manufactured for special applications which can’t be accomplished by any other product on the market, whether plywood or some other material.

## How thick should plywood be for flooring?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

## How thin does plywood come?

The standard thicknesses for plywood are 1 ¼, 1 1/8, ¾, 5/8, ½, 3/8, ¼, and 1/8 inches. The corresponding actual thicknesses are 1 ¼, 1 1/8, 23/32, 19/32, 15/32, 11/32, 1/4, and ⅛, respectively. This takes into the effect of sanding throughout the process of manufacturing the plywood for each of these sizes.

You might be interested:  Often asked: How To Install Stone Ledger On Plywood?

## Can you Dado plywood?

Strong, reliable, and easy to make, a full-width dado (across the grain) or groove (along the grain) perfectly captures the mating workpiece with glue surface all around. As a general guideline, cut a dado to a depth about half the thickness of the plywood. You can cut dadoes and grooves with a tablesaw or router.

## Why is plywood in 32nds?

The reason un-sanded plywood, such as sheathing, is described as 15/32-in. thick is to reflect the manufacturer’s tolerance of 1/32 inch, even though in layman’s terms the sheet is equivalent to a 1/2-in. sheet of plywood.

## What is the difference between 3 4 and 23 32 plywood?

Plywood is often sold in 1/4“, 1/2“, or 3/4” nominal thicknesses, but the actual thickness is often 1/32” thinner. Because the actual thickness may vary measuring the plywood is the only accurate way to determine its thickness. A 3/4” sheet is actually 23/32” thick.